Plastic Prop Shaft Thingy?

co256

Well-Known Member
Joined
10 Jan 2009
Messages
394
worldwidewaites.blogspot.com
Anyone seen one of these before or can tell me what it is?

The Surveyor commented on it saying "Although in good condition at this time, the external bearing appears to lack a proper water supply to it."

I've never seen one of these "Plastic Thingys" on a prop shaft before?!

Many thanks. Plastic Prop Shaft Thingy
 
Following the Jeremy Rodgers link above.....

stern_tube_bearings_tufnol.jpg


Photo courtesy of Jeremy Rodgers

This is the Vega

27InstalledLength.jpg


Ash
 
Hmmm....

....doesn't look like the Tufnol and whilst the bronze fitting looks the same on the Vega picture supplied by Ash..... the plastic thingy isn't present?!

Thanks again folks.
 
I don't have a picture of the fitting. This is a picture with the fitting missing. The origional bearing was Tufnol - fairly thin wall - maybe 3mm IIRC. The replacement was a 'plastic' material and supplied by SteveBirch of this parish.

On the Vega the 'tube' part of the fitting points aft. To me it looks as your tube points forward, entering the stern tube. The bit of the bearing that you can see in your photo is the flange seen in the Jeremy Rogers photo.

23AftAlignmentCone.jpg


Ash
 
Top