Picture of Das Boot

[ QUOTE ]
By the way what did I do wrong?

[/ QUOTE ]

replace your "-" with "/" ... but without the quotes....
 
All you '/' characters are represented incorrectly by '-' characters. For example 'http://' came out in your post as 'http:--'.

Are you posting while at sea, leaning over on a port tack, making your '-' look like '/'?
 
because the actual url, not the one you posted, is
http://www.feltzboote.de/upload/ausfuehrungen/bilder/segelboote/gross/SK2Hummel.jpg

Like this
SK2Hummel.jpg
 
Nice boat as well. Is it glass?

It is a feltz skorpion II round bilged steel. Although the pic is not of my boat it is a sister ship I also have an inner stay which I see this one does not have as it is a slightly shorter model. It is a good enough pic to get an Idea of what my boat looks like. There are not many flush deck boats arround so it is difficult to get a pic. My wife and I are short asses so we have plenty of room below. Although the deck looks flat it is quite rounded. The port holes are double glazed 12mm poly on the outside and 5mm poly on the inside should we fall off a wave. They do not open.
 
Im short ass too got 6.2" headroom so I have pleanty of room too.yes its sold glass 8tonne, i have just ordered new portholes for Sea princess im only useing 6mm hope that will be ok.this pic shows the templates i have stuck on to see what she looks like with the new ports, i have a total of 6 new deck hatches so plenty of fresh air below. [image]
000_0093_0001.jpg
[/image] [image]
000_0054.jpg
[/image]
 
The Hatches look better than my vetilator cowels. I am just cautious. If you are using polycarbonate I dont think you should have a problem it is very strong. Even if they do go in it should not sink the boat It is more likely that the fixing will be ripped out that is why I have put the extra ones on the inside using different fixing points. It was not so much the thickness of the Poly that worried me.
 
The boat in the pic looks exactly the same just a bit shorter by maybe 1 meter. It is 39.37 ft exactly not counting any stickey out bits for and aft. The one in the pic is 36ft.
 
Top