Perkins 6354HT injector pump advice

[The Puzzled one]

I'm trying to sort out a small leak which appears to be coming from what looks like a second bleed screw on the underside of the injector pump next to the engine block. I can't get a spanner in here so wondered how easy it is to remove the injector pump to get a better look at the other side, then refit afterwards. Any advice would be appreciated thanks.

 

[volvopaul]

The pump is on a spline drive so take off all pipes and the 3 nuts holding it to the block ,there is a master spline so you can't get the timing wrong scribble a mark on the body and block before you lift it off,
Complicated process if you have to time it from scratch , won't go there,

 

[Seastoke]

The pump is on a spline drive so take off all pipes and the 3 nuts holding it to the block ,there is a master spline so you can't get the timing wrong scribble a mark on the body and block before you lift it off,
Complicated process if you have to time it from scratch , won't go there,

Nice one Perkins paul

 

[The Puzzled one]

Cheers Paul, going to have a look this week hopefully an easy fix.