MLR FX312 GPS instructions

[Spankerwrap]

I have the FX312 fixed GPS on board, bought with the boat, but without instructions. Although I can get the basic functions to work by pressing buttons till something happens, I am looking to activate the anchor drag alarm function without success.

Has anyone knowledge of how to do this? Any advice appreciated.

 

[allangray3]

Try Here http://www.magellangps.com/products/Search.asp?q=mlr+312&Submit1=Search

 

[chasroberts]

Re: MLR FX312 GPS instructions

Send me a PM with your email address and i will scan the quick reference card and send it to you. The instruction book runs to around 100 pages but the card should be enough to get you what you want.

Regards

Chas

 

[chasroberts]

Re: MLR FX312 GPS instructions

Just dug out the details from the manual. It reads as follows:

From the NAVIGATION MENU press key 7 (or select 7-ALARMS and press ENTER), then press the key 0 to select ARRIVAL ALARM. Use the up and down keys to move the cursor in the option window. Use the left and right keys to select alarm ON/OFF and the mode required. Use the numeric keys to enter the distance. Once all the parameters are configured, press ENTER to validate.

Hope it helps.

Regards

Chas

 

[[10753]]

I have MLR GPS. Try contacting the following - very helpful.

Mantsbrite Electronics
19F Spital Road
Maldon
Essex
CM9 6DY 01621 853003