M8 Thread Extender?

[nigelmercier]

I want something like this thread adaptor, but with M8 male and female threads...

What should I look for?

 

[pvb]

How about a studding connector with some M8 stud in the other end?

http://www.westfieldfasteners.co.uk...HexLong_M8=1&gclid=CO_D8oWFqcoCFYu4Gwod-1QKsA

 

[rogerthebodger]

One of these (long nut) together with a piece of all thread (threaded bar)

https://www.google.co.za/search?q=M...X&ved=0ahUKEwi9mO-PhanKAhWF6xQKHTpJAm0QsAQIGQ

Or with your lathe you could make one.

 

[TSB240]

I want something like this thread adaptor, but with M8 male and female threads...

What should I look for?

http://www.atomicengineering.co.uk/steel_stand_off_pillars-male.htm

Will somebody want the other 99? Min order 100!

We use m6 male to female nylon insulated standoffs and I have a few left! If they are of any use

Steve

 

[Iliade]

Namrick in Hove are very helpful and will post...

http://www.namrick.co.uk/acatalog/contact-us.html


http://www.namrick.co.uk/acatalog/Metric_Stud_Conn.html

They probably stock exactly what you want too, but I don't know the proper term... I thought is was something like stud-nut, but searches are linking that term to rivnut-like products.

 

[maxi77]

How about http://www.atomicengineering.co.uk/steel_stand_off_pillars-male.htm

 

[Spirit of Glenans]

Remove the existing stud an replace with a longer piece of threaded stud cut to size?

 

[lw395]

I want something like this thread adaptor, but with M8 male and female threads...

What should I look for?

A swarf-monkey with not enough work to do?

We use things like that in M3 or M4 as spacers in stacks of PCB's.

 

[lw395]

A swarf-monkey with not enough work to do?

We use things like that in M3 or M4 as spacers in stacks of PCB's.

I expect you wanted stainless, but:
http://www.mechanicalcomponents.co.uk/en/catalog/precision/spacers-pillars/hex-pillars/p0061.zp

Search for 'hex pillars'

 

[Avocet]

+1 for using a coupler with the cut-off end of a machine screw of the appropriate length screwed part way into it with a bit of Loctite.

http://www.ebay.co.uk/itm/M4-M5-M6-...hash=item5413aa2959:m:mGNSXesr68BSXpZi6UVy2qA

 

[Laysula]

http://www.atomicengineering.co.uk/steel_stand_off_pillars-male.htm

Will somebody want the other 99? Min order 100!

We use m6 male to female nylon insulated standoffs and I have a few left! If they are of any use

Steve

Ask for a sample.

 

[VicS]

I want something like this thread adaptor, but with M8 male and female threads...

What should I look for?

If you had a small lathe and a set of M8 taps and dies you would be able to make something !

 

[nigelmercier]

If you had a small lathe and a set of M8 taps and dies you would be able to make something !

Well I have all that, but was hoping I could get something ready made.