Looking for a stainless steel and teak 12" Cleat

[Alicatt]

I'm looking for 4 stainless steel and teak cleats, I been searching on the interwebs for a while but can't find anything like this:


The ones on the boat were originally chromed with the teak bar through them, the teak has gone on 3 of them and all 4 have lost the chrome so looking to replace with stainless, the 5.5" or 140mm (aprox) spacing between the mounting bolts is the most difficult to find - so far none.
Anyone know where I can find some?
If I can't find any then I will have to make new teak bars to go through the metal parts, I have to take them off and re-seal the fittings anyway.

 

[rogerthebodger]

You could use 2 of these with a round piece of round teak to form the tee top

They are hand rails stand offs for the top of coach roof

https://www.baselinemarine.com/shopexd.asp?id=19242

https://www.baselinemarine.com/shopexd.asp?id=19244

 

[Tranona]

Nobody makes complete cleats in that style that I know of, just the stands either stainless like those shown or bronze ones from Davey.

 

[Davy_S]

The Albin Vega had similar stern cleats, two brackets like Rogerthebodger has shown, with a teak dowel, just to give you an idea, doubt if they are available now.
The New International Albin Vega Club - The Albin Vega Club

 

[Davy_S]

If you look at this photo you can see the stern cleats.

 

[PCUK]

If you have the old ones re-chromed you can keep them in good order by frequently waxing them.

 

[thalassa]

Same style, but all-SS :
Cleat

 

[Alicatt]

Same style, but all-SS :
Cleat

Yes, thanks, seen ones like this but the mounting bolts are too close together, I’m trying to avoid having to drill more holes in the deck. Will have a better look at them when I get back home later.

 

[MontyMariner]

You could use 2 of these with a round piece of round teak to form the tee top

I like that idea, a good bit of lateral thinking

 

[Alicatt]

Same style, but all-SS :
Cleat

I've sent an email to get more details

 

[BabaYaga]

The Albin Vega had similar stern cleats, two brackets like Rogerthebodger has shown, with a teak dowel, just to give you an idea, doubt if they are available now.
The New International Albin Vega Club - The Albin Vega Club

I have that type of cleats on my 44 year old boat, they are still available here:
Pollare - Stock av teak Förkromad mässing - SEASEA
The brackets are chromed brass, the bolts stainless steel.

 

[Davy_S]

I have that type of cleats on my 44 year old boat, they are still available here:
Pollare - Stock av teak Förkromad mässing - SEASEA
The brackets are chromed brass, the bolts stainless steel.

That's a good find!

 

[Alicatt]

I have that type of cleats on my 44 year old boat, they are still available here:
Pollare - Stock av teak Förkromad mässing - SEASEA
The brackets are chromed brass, the bolts stainless steel.

Looks good and the price is not too terrible either at €62 + 79Kr postage
However they only deliver to Sweden, but it has given me more info to search on
Thanks @BabaYaga

 

[Alicatt]

And with that I have found the correct item, thank you all for the help and prodding my translation algorithm

Seashop - Your online shipchandler aaand out of stock

 

[PCUK]

If you don't want to have the old ones re-chromed, why not take them off and polish them back to original bronze and then lacquer them?
If you need Teak, I can help there for not a lot.

 

[Alicatt]

If you don't want to have the old ones re-chromed, why not take them off and polish them back to original bronze and then lacquer them?
If you need Teak, I can help there for not a lot.

This is what I'm planning at the moment, the 300mm size is unavailable, my son has a metal fabrication business and gets things chrome plated so that is not a problem, and the cleats have to come off anyway as they need re-sealed.
Do you send to Belgium?
I don't have any accurate sizes at the moment, I was just taking a rough measurement of the cleats so I could search for something close, I am back at the boat tomorrow and will get a more accurate measurement of the wooden part, there is only one cleat left with wood in it and that is well rotten, the wood is oval aprox. 50mm along the widest part and 300mm long

 

[PCUK]

When you know the size I'll send you an appropriate off-cut to shape yourself and I can post wherever you want as long as you cover the cost!

 

[Alicatt]

When you know the size I'll send you an appropriate off-cut to shape yourself and I can post wherever you want as long as you cover the cost!

Thanks

 

[MoodySabre]

Timage sell them.
also W&W Marine in Finland
and maritimusboote.de

 

[Jerbro]

Timage sell them.
also W&W Marine in Finland
and maritimusboote.de

Bollard Deck Cleat with Wooden Ledge