Cspirit
Well-Known Member
I have the above windlass and want to change the gypsy from the present 10mm to 8mm. My question is - can I simply swap the 10mm for a new 8mm, or do I also need a new stripper and clutch?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Lofrans Cayman 88 windlass gypsy question
- Thread starter Cspirit
- Start date
[2574]
...
I did this very same thing. It's a simple gypsy swap; it takes all of five minutes to do.
Rob
Rob
Neeves
Well-Known Member
As you already know gypsies cost a small fortune - hang on to the old one - someone will want a 10mm one day - and if its not worn out you can part cover the cost of your new one.
Just out of interest - why the change?
Jonathan
Just out of interest - why the change?
Jonathan
Cspirit
Well-Known Member
As you already know gypsies cost a small fortune - hang on to the old one - someone will want a 10mm one day - and if its not worn out you can part cover the cost of your new one.
Just out of interest - why the change?
Jonathan
Why change? I currently have 60 metres of (extremely rusty) 10mm chain. We anchor frequently (we are in the Med) and a big problem is that the chain piles up in the anchor locker necessitating a crew member to go below and flake. I've tried all the usual remedies but the locker is simply too small/high up so Ive decided that, as the chain needs replacing I will try the smaller size - 10mm is overkill for a 36ft boat. The jury seems to be out on the catenary argument, and 8mm is more than strong enough (I hope!) Bob