Kad44 fuses

[petem]

Am I right in thinking that this is the drive trim fuse?

Also, what are these two fuses?

 

[simonfraser]

yes top image with the two chunky leads

 

[jrudge]

And if you need them they are cheaper from Keypart than Volvo

Lower ones are low power some i guess the ECU fuse?

 

[[2068]]

I’m not entirely sure - the diagrams don’t make it clear, but I think the fuses in the second picture might be related to the gear shift actuator.

 

[Groova]

I’m not entirely sure - the diagrams don’t make it clear, but I think the fuses in the second picture might be related to the gear shift actuator.

The fuse for the gear shift actuator is down by the starter motor. I recall its a 5A fuse.

 

[MapisM]

Sorry for not being able to help with your question, but are you sure that the rubber hose in the right side of your first pic (probably a breather hose, if I should guess) isn't missing a hose clamp?

 

[petem]

Sorry for not being able to help with your question, but are you sure that the rubber hose in the right side of your first pic (probably a breather hose, if I should guess) isn't missing a hose clamp?

Hnmm. Will check!

 

[Groova]

Sorry for not being able to help with your question, but are you sure that the rubber hose in the right side of your first pic (probably a breather hose, if I should guess) isn't missing a hose clamp?

I assume you mean the hose going into the top of the block where it says “24 V” in the picture? If so, it’s the same on my KAD44s.

 

[MapisM]

Yep, that's the one I meant. Well, if that's fine for VP, who am I to argue?
I didn't say that there has to be a clamp hose, just that it seemed odd not to have one, regardless of the hose function...

 

[simonfraser]

no clip on mine either or indentations.