It works again!

[chris-s]

After changing the head gasket, getting the injectors serviced and giving it a bit of tlc and rebuilding the water pump it runs once more!

Thanks to all those who offered tips and advice. Will give it a sea trial this weekend and see how she fares.

 

[jamie N]

Good news, but link the original thread!!

 

[chris-s]

Good news, but link the original thread!!

Get my engine running again - dealing with the emulsified oil

 

[ridgy]

Well done, must be very satisfying. I've celebrated far less impressive engine feats than this. Replacing a core plug the other week was sufficient for a 5th growth.

 

[KompetentKrew]

I've celebrated far less impressive engine feats than this. Replacing a core plug the other week was sufficient for a 5th growth.

IDK what a 5th growth is, but I was so dancing when I replaced my leaky fuel filter and bled the engine.

 

[PeteCooper]

Did you check that the block surface and head face were both flat before replacing the gasket?

 

[rotrax]

Did you check that the block surface and head face were both flat before replacing the gasket?

Sounds like it is too late if he did not.............................................

 

[38mess]

Did you check that the block surface and head face were both flat before replacing the gasket?

I think both the head and block are cast iron, would they warp?

 

[Boater Sam]

I think both the head and block are cast iron, would they warp?

Yes, the head more likely than the block.