Identify this plastic spanner.

[Mark-1]

Found this plastic spanner with boaty stuff in the garage. No recollection of what it's for and pretty sure I've never used it.

Anyone tell me what it is so I can bin it with confidence?

 

[Kukri]

Possibly for extracting a log impeller?

 

[C08]

It is similar but not identical to the tool used for fitting/extracting inflatable dinghy valves.

 

[MikeCC]

Might depend on the valves involved. Top one looks like it might be for removing inner part of valve.

Alternatively, could be for nut holding lawnmower blade on.

 

[ctva]

It is similar but not identical to the tool used for fitting/extracting inflatable dinghy valves.

Seago version of the valve removal tool.

Stick it on fleabay, someone might need it.

 

[prv]

An identical one came with one of my inflatable dinghies, so another vote for dinghy valve tool.

Pete

 

[VicS]

Is it a "Halkey Roberts and Waveline Plastic Inflatable Boat Valve Removal Tool" ?

https://seamarknunn.com/acatalog/halkey-roberts-waveline-valve-tool-plastic-3598.html#SID=658

 

[lw395]

Looks a bit like the tool for dismantling our showerhead.

 

[Champagne Murphy]

It’s an eight section valve removal tool. AFAIK Halsey Roberts are the main manufacturers. The earlier ones were six section but you can’t find those now so a failed six section valve means cutting the vinyl around the valve to fit an eight section one with a different thread etc etc.
Don’t ask how I know.

 

[Mark-1]

It is similar but not identical to the tool used for fitting/extracting inflatable dinghy valves.

Seago version of the valve removal tool.

Stick it on fleabay, someone might need it.

An identical one came with one of my inflatable dinghies, so another vote for dinghy valve tool.

Pete

Is it a "Halkey Roberts and Waveline Plastic Inflatable Boat Valve Removal Tool" ?

https://seamarknunn.com/acatalog/halkey-roberts-waveline-valve-tool-plastic-3598.html#SID=658

It’s an eight section valve removal tool. AFAIK Halsey Roberts are the main manufacturers. The earlier ones were six section but you can’t find those now so a failed six section valve means cutting the vinyl around the valve to fit an eight section one with a different thread etc etc.
Don’t ask how I know.

Thanks guys, especially VicS. I had faith the PBO forum would nail this but am still delighted that it got nailed so quickly and so emphatically!

Much appreciated.