Help please

[Seastoke]

Just antifouled the boat polished the rudder props trim tabs and p bracket s . What could I put on those to stop fouling .

 

[Mr Googler]

Just antifouled the boat polished the rudder props trim tabs and p bracket s . What could I put on those to stop fouling .

Just leave it on the side….problem solved

Or….prop speed

 

[Mr Googler]

Seacock isn’t known as marina queen for nothin’

 

[Seastoke]

Seacock isn’t known as marina queen for nothin’

Boats on the hard , which isnot me thinking of you.

 

[dpb]

I have been using velox products last 3 years ( primer then antifoul). Works for us.

 

[Scubadoo]

Seajet 034 works well for me.

 

[LBRodders]

Just antifouled the boat polished the rudder props trim tabs and p bracket s . What could I put on those to stop fouling .

Once your props are fouled, turn them around and then use astern as fwd. You will get double the use out of them.

 

[Mr Googler]

Once your props are fouled, turn them around and then use astern as fwd. You will get double the use out of them.

As if they will turn at all this year!

 

[kashurst]

go boating and drive it hard.
the barnnies only get a grip when it stops moving.

or park it in a river well away from the sea. Kip marina near Glasgow is good for avoiding fouling, fresh water stream runs through the marina.

or follow MrG's excellent advice...

 

[Seastoke]

go boating and drive it hard.
the barnnies only get a grip when it stops moving.

or park it in a river well away from the sea. Kip marina near Glasgow is good for avoiding fouling, fresh water stream runs through the marina.

or follow MrG's excellent advice...

MR G even antifouls his boat in his bath.

 

[Farmer Piles]

I had great success with Propspeed. It has done two years and I am squeezing out a third.