Heat Exchanger

[MarkJohnson]

My 1980 built boat has a Marteck heat exchanger which works very efficiently.

In the system, there is an electric pump, whose job is to circulate the fresh water system.

The conection to this has failed a couple of time in the recent past, and is difficult for me to repair.

I have two options

1. is to continue repairs and hope to make a final repair.
2. is to replace the old system with an up to date heat exchanger.

As Marteck do not seem to be in business any more, where can I get marteck spares, or what other heat exchangers are currently available to bolt onto my old Bukh engine

regards

Mark J

<hr width=100% size=1>

 

[dwarwick]

try this site www.asap-supplies.co.uk
loads of stuff on heat exchangers etc. they do martec kits
very helpful and good service

<hr width=100% size=1>

 

[dwarwick]

still better try www.asap-supplies.com!
regards
dave h

<hr width=100% size=1>

 

[maxi]

Mark, try Aquafax 01582 568700 who were Martek stockists. In any event, I believe that the pump was a simple Jonstone pump & readily replaceable.

<hr width=100% size=1>

 

[steve28]

Speak to tim at aquafax, they stock all the parts for the still produced heat exchangers.
Be prepared though,the pumps are a few pounds!

<hr width=100% size=1>

 

[steve28]

Speak to tim at aquafax, they stock all the parts for the still produced heat exchangers.
Be prepared though,the pumps are a few pounds!

<hr width=100% size=1>

 

[steve28]

Speak to tim at aquafax, they stock all the parts for the still produced heat exchangers.
Be prepared though,the pumps are a few pounds!

<hr width=100% size=1>

 

[MarkJohnson]

Thanks to all for the info.

regards

Mark J

<hr width=100% size=1>