Half a YAPP - mini-mast display

[prv]

...and pray tell us, what is that !! and should we be getting excited !!!!

Fairly obviously, it's the design for a printed circuit board for this device, which Angus is apparently having manufactured in China.

Pete

 

[nigelmercier]

Never made any so far, but I'm trying in DesignSpark.

Fairly obviously, it's the design for a printed circuit board for this device...

Quite a tricky one for a first board, double-sided no less. I've yet to make a DS board, as registration can be problem for etching at home. I quite like the challenge of placement and minimising jumper tracks on a SS board; in a project like this it normally requires the PIC pins to be reassigned.

I've never sent a board for manufacture, but at home I never use 90° bends, always 2 x 45° - tracks can get a bit messed up in tight corners.

 

[Jabamusic]

Fairly obviously, it's the design for a printed circuit board for this device, which Angus is apparently having manufactured in China.

Pete

Spoil-sport !!

 

[nigelmercier]

I find these YAPP type discussions very interesting, but it is hard to keep them organised. I've made a suggestion for a new forum:
http://www.ybw.com/forums/showthrea...w-forum-for-YAPP-type-projects-be-a-good-idea