Galley sink

[DoubleEnder]

Sorry to be so boring, but can anyone suggest a place to find a stainless steel galley sink that is 10 inches square by 6 inches deep. Or thereabouts. Or sell me one, even? I don't have much space and I don't want a round sink because the plates get stuck. Plastimo and EC Smith have let me down. Help

Thank you
Graham

 

[Frontier]

Hi try Penguin Engineering on Hayling Island,

they have various size sinks

Sorry I dont have a link but you could try to Google them.

Bought some taps from them, very helpful.

good luck

D

 

[nimbusgb]

I had my hands on just such a beast. Its in the chandlers in Preveza!

 

[mainmarine]

you could try a local catering equipment supplier, they have stainless steel basins in all sizes used for displaying and serving food, you will have to punch a hole for the waste fitting though.

 

[Athene V30]

Have you looked at camping websites? Sinks

 

[Pasarell]

I found the exact size sink I was looking for on ebay earlier this year. Penguin were close with their wide range but not quite exact. Mine came from a caravan supplier and was 75% cheaper than any of the "marine" sinks. Can't remember their name but searching will bring them up I'm sure

 

[DoubleEnder]

Penguin Engineering has just the job. Thank you very much. What a joy when the forum does this.....Excellent, thanks again Frontier

 

[Vamoose]

Another vote for Penguin... I got one via Mailspeed ... Same price as buying it direct from Penguin Engineering Hayling Island

Phone: 023 9246 5607
Fax: 023 9246 1325
Contact Name: Graham Wickham
Email: info@penguineng.com
Website: www.penguineng.com


OOOP's sorry I see you have got it sorted out already !

 

[Woodentop]

Smaller plates ?

 

[time20]

I'm so new here.. I would just like to say that I'm a homeowner myself and I would like to purchase and replace my own stainless steel sink, I've come across this site and I'm so close to purchasing this. Can you advice me of what to do please?

http://www.thehardwarecity.com/?sku=5354329

 

[Refueler]

Plates stuck - know it well ! Trick is to leave a cup in bottom of sink till last. Then plates cannot lay flat.