mumbles
New member
OK this is not on a boat, but it is oak and needs to look good.......front door step, got damaged by water I think, sanded it back to take off dark stain and old varnish, now need to finish it. Is it possible to use epoxy resin for this to give a shiny tough coat, or is there a problem with UV degrading ? it is in full hot sun, south facing, what would you use to get a tough lasting finish ? Thanks.
By the way, I am a Bobbin dinghy owner, and re last posts I managed to get the sheet rigged and works ok, but during recent sail lost all steerage, as the shock cord came out of the tiller housing, now fitting a lanyard to retain the blade where it should be, this was at Roadford Lake the day before the awful accident, no wind anyway. That shock cord could come out at any time, too risky !
By the way, I am a Bobbin dinghy owner, and re last posts I managed to get the sheet rigged and works ok, but during recent sail lost all steerage, as the shock cord came out of the tiller housing, now fitting a lanyard to retain the blade where it should be, this was at Roadford Lake the day before the awful accident, no wind anyway. That shock cord could come out at any time, too risky !