Echopilot Bronze Plus wiring

[PabloPicasso]

I Have an Echopilot Bronze Plus paddlewheel log. It appears to have 4 wires in a grey sleeve.
I want to connect it to an nmea converter, but I can't find any info on what each coloured wire is. I presume a pos, neg, and a circuit carrying pulses from the paddlewheel magnets.
Can anyone show me a wiring diagram or manual
Its from a Echopilot Bronze Plus trio. Probably not available anymore...

 

[doug748]

I Have an Echopilot Bronze Plus paddlewheel log. It appears to have 4 wires in a grey sleeve.
I want to connect it to an nmea converter, but I can't find any info on what each coloured wire is. I presume a pos, neg, and a circuit carrying pulses from the paddlewheel magnets.
Can anyone show me a wiring diagram or manual
Its from a Echopilot Bronze Plus trio. Probably not available anymore...

The wiring was all over the shop on these units. I may be able to find something. What colours do you have there?

.

 

[PabloPicasso]

The wiring was all over the shop on these units. I may be able to find something. What colours do you have there?

That'd be great. I'll check the wiring coloura when I'm down at the boat.

 

[doug748]

I am away at the moment but think this may be true of the four wires coming from the transducer:

Black (or Green). signal out
Red. +5v in
Blue. signal ground
Screen, not sure of colour, could be braided? 0v

.

 

[jane444blue]

3 pages from my manual , let me know if you need anything else out of it

 

[PabloPicasso]

3 pages from my manual , let me know if you need anything else out of it

Ah thanks, that looks like just what I need