Diesel heater controller

[MToland]

Concerning a thread I happened across. Where a gentleman was inquiring about which controller to opt for w Chinese diesel heaters.
I’ve included two photos of the on I have . I have owned my diesel heaters for 3 weeks and have not been able to get two straight days of use out of it. Instructions are useless for my application. These two photos I included are what controller has decided to do now. In steady format blinking. I had installed two of these for friend f mine in their individual motorhome and coach. Phenomenal results. Get on for myself with controller being the only difference (mine has the 4 port duct as opposed to the single duct I have installed)
Any help please

 

[peteK]

The number of leds blinking gives the fault code.

 

[MToland]

The number of leds blinking gives the fault code.

Thank you, the moment I read your words it clicked. You should consider writing Chinese instructional material . Call it “For (La((me)n))”
Probably put your estate on another level.
Thanks

 

[MToland]

Do you know if it’s common that the fan speed only goes to only 6 of the 10 indicator LED’s?

 

[peteK]

There are 2 versions of this controller the earlier one used all leds the latest one doesnt.

 

[boatmike]

I have a controller with a little LED display which is I think a fairly common item. The problem is that while the heater works the display can only be read at night. Cant see how to increase the brightness. Anyone know how to turn it up so I can read it in daylight?
That should be LCD not LED. Its the one that shows a little picture of the heater with a rotating fan.

 

[Nauti Fox]

Thank you, the moment I read your words it clicked. You should consider writing Chinese instructional material . Call it “For (La((me)n))”
Probably put your estate on another level.
Thanks

 

[peteK]

I have a controller with a little LED display which is I think a fairly common item. The problem is that while the heater works the display can only be read at night. Cant see how to increase the brightness. Anyone know how to turn it up so I can read it in daylight?
That should be LCD not LED. Its the one that shows a little picture of the heater with a rotating fan.

Its a common fault with some of these Chinese controllers,there is a mod that can be done which involves replacing the led's,you may find a utube video,and no its not possible to turn brightness up.