Geoffs
Well-Known Member
Nope, gotta be done. Ill find out in due course and let you know.
D4 power trim gremlins!
- Thread starter Geoffs
- Start date
Nope, gotta be done. Ill find out in due course and let you know.
Geoffs
Well-Known Member
Well it's been an interesting couple of days.
VP engineer arrived yesterday with, don't think it was a Vodia, was a box that plugged into engine and connected to a laptop.
After lots of tests a checks,it appeared that HCU was faulty. Engineer left and would come back today with spare HCU, to prove conclusivly.
He re checked wiring diagrams over night, and reckons the control lever push buttons are wired incorrectly and doesn't see how they could ever have worked, but they did. He has plugged an EVC power trim panel into HCU, and all works. So HCU OK, good news.
The proposal is to abandon push buttons on control lever and install power trim control panel. Sounds ok to me, will cost a bit, but less than HCU!
VP engineer arrived yesterday with, don't think it was a Vodia, was a box that plugged into engine and connected to a laptop.
After lots of tests a checks,it appeared that HCU was faulty. Engineer left and would come back today with spare HCU, to prove conclusivly.
He re checked wiring diagrams over night, and reckons the control lever push buttons are wired incorrectly and doesn't see how they could ever have worked, but they did. He has plugged an EVC power trim panel into HCU, and all works. So HCU OK, good news.
The proposal is to abandon push buttons on control lever and install power trim control panel. Sounds ok to me, will cost a bit, but less than HCU!
aquapower
Well-Known Member
The new Vodia is a box that plugs into a laptop, the PDA ones a being phased out.
Geoffs
Well-Known Member
Ah, looks like they've got the latest gear, reassuring!
Geoffs
Well-Known Member
Just to close out this thread. Away on boat at the moment(in Yarmouth), so been able to check out the work done by VP engineer.
Pleased to report everything working well. New EVC power trim panel in excellent. Why the old lever mounted controls wre deemed incorrect beats me. But there we go! Just pleased not to need a new HCU.
Haven't had the bill yet, so don't know final cost.
Pleased to report everything working well. New EVC power trim panel in excellent. Why the old lever mounted controls wre deemed incorrect beats me. But there we go! Just pleased not to need a new HCU.
Haven't had the bill yet, so don't know final cost.
volvopaul
Well-Known Member
In yarmouth too.
[2068]
...
VolvoMort Booms: "YOUR ETERNAL SOUL AND THAT OF YOUR DESCENDANTS FOR THREE GENERATIONS"
ooops, sorry about that, there was a mix up in invoicing.
That was for the consequences of a failed injector on a D6.
Geoffs
Well-Known Member
Sorry, only just picked up your post, are you still here. Must owe you a beer for all help and advice. I'm on blue pontoon if you are around.
Geoffs
Well-Known Member
Ah we need Harry Potterabout then.
volvopaul
Well-Known Member
Yes I'm on red 6 , what's yer boat called ?
Geoffs
Well-Known Member
My Memory Maker. Boat used to belong to GC1, aka Happy1, of distant past!
I'll be leaving for Poole about 10:00 tomorrow