custom switch panel

[simonfraser]

where do i buy something similar to this:

Switch Panel with Push to Reset Fuse and Rocker Switch 6 Gang, 12V - midmarine.com

few morew breakers
and a -ve bus bar on the back of the panel

tnx

 

[dolabriform]

Try here:
All Panel Types

 

[simonfraser]

Try here:
All Panel Types

tnx, that gives me a few options

 

[laika]

No personal experience but I believe @halcyon is associated with kdd powercentre who seem To be popular with westerly owners

 

[simonfraser]

tnx, that better with the printed legends

how can i trip the existing circuit breakers to see what they each actually each do ?
shorting them out seems a brutal way to proceed ?
no seperate switch for each circuit at the moment, all the wires are soldered on at the back of the existion panel
i can cut them and solder them back on

 

[[185615]]

where do i buy something similar to this:

Switch Panel with Push to Reset Fuse and Rocker Switch 6 Gang, 12V - midmarine.com

few morew breakers
and a -ve bus bar on the back of the panel

tnx

I have just built one. 16 circuit switches, clipper navtex, bilge pump control switch, battery isolation switch.
Built on a 6mm ply, which will be fasten to existing panel once all old stuff removed.
The finish is a real walnut veneer looks really nice.
Wired with thin wall cable makes wiring easier and neater.
Have a photo if interested

 

[[70521]]

No personal experience but I believe @halcyon is associated with kdd powercentre who seem To be popular with westerly owners

I had a superb custom built panel from @halcyon last year and recommend him.

 

[tillergirl]

I have got three used panels that I do not use anymore. Do you want them?

 

[simonfraser]

I have got three used panels that I do not use anymore. Do you want them?

tnx tillergirl, that's v kind of you
others have sent links for a custom panel with appropriate printing, that is where i am going to go for a replacement

i'll have to trip all the hardwired existing circuits to figure out which numbered breaker does what

 

[tillergirl]

Design it yourself. I did these:

P1040683 by Roger Gaspar, on Flickr

P1050137 by Roger Gaspar, on Flickr

Combined switch/breakers easy to get, LEDs easy to get. Easy to get a bespoke acrylic or ally panel.

 

[pyrojames]

I used these (Modular Panel System - 4 Versatile Panel Sizes With Many Options) on a previous boat, but went fully custom for the current one.