Cockpit coaming storage

[Olly6]

My 1970's quarter tonner has a really handy storage cubby set into the cockpit coaming wall - basically an ABS plastic box with a lip and a teak bar accross it to keep the VHF/mars bar/gloves in place. Question is, where can I find something similar to fit on the other side of the cockpit to add to my storage options. Lalizas do a couple of such lockers however they are bigger than I have room for (something around 20x30cm, 10 cm deep region). After hours of googling, still drawing a blank!

 

[alahol2]

You may have to lay one up yourself if you want a specific size. Could use a baking tin maybe as a mould?

 

[Quandary]

There is a forumite around Glasgow (I think) who was doing that sort of custom moulding, binnacle pods and such, to an apparently high standard.
Just can not remember who but will try to search for the old threads

 

[Stork_III]

There is a forumite around Glasgow (I think) who was doing that sort of custom moulding, binnacle pods and such, to an apparently high standard.
Just can not remember who but will try to search for the old threads

Clyde Wanderer http://www.ybw.com/forums/showthread.php?272869-Grp-Mouldings&highlight=glassfibre+mouldings

 

[pvb]

SSI make some, but you might have to order from the USA, eg http://www.defender.com/product3.jsp?path=-1|7504|2290179&id=74522

 

[JumbleDuck]

My 1970's quarter tonner has a really handy storage cubby set into the cockpit coaming wall - basically an ABS plastic box with a lip and a teak bar accross it to keep the VHF/mars bar/gloves in place. Question is, where can I find something similar to fit on the other side of the cockpit to add to my storage options. Lalizas do a couple of such lockers however they are bigger than I have room for (something around 20x30cm, 10 cm deep region). After hours of googling, still drawing a blank!

Something very like this was advertised in the back of PBO for years. I haven't seen the advert recently, but then I haven't been looking for it.

Yrs helpfully

JumbleDuck

 

[Lodesman77]

Still in the back of PBO. It's the Sheraton Yacht Tidy:-

http://www.sheratonmarinecabinet.co...aton-Yacht-Tidy.html?shop_param=cid=5&aid=05&

 

[JumbleDuck]

Still in the back of PBO. It's the Sheraton Yacht Tidy

Good man. That's the badger. My boat has one of these fitted and it's jolly useful. In fact, now I know they are still available I may think about fitting another.

 

[Seajet]

I fitted one of these Sheraton jobs on my boat, very useful and has space for an external VHF speaker & binoculars, winch handle etc.

 

[Olly6]

I fitted one of these Sheraton jobs on my boat, very useful and has space for an external VHF speaker & binoculars, winch handle etc.

This looks spot on - just what I'm after many thanks!!