rogerthebodger
Well-Known Member
I wonder what type of propellent this uses and if there are some types or spray can propellent that must be avoided.
Canopy clear vinyl windows - Cleaning
- Thread starter seaboy
- Start date
Trundlebug
Well-Known Member
I think the Pledge cans just use compressed air
seaboy
Well-Known Member
I have started cleaning the vinyl windows, but its going to take awhile with the state they are in from the previous owner.
I have tin of Brasso and T-Cut which both are hard work. Did try a plastic scouring pad the type with sponge on the back, bad results marking the vinyl.
So as seen on the Tube, some use a 75mm polishing pad in a drill on their soft jeeps etc., as anything faster than drill speed (ie: disc grinder) could burn the vinyl.
Which do you think would be more suitable Rayon or Wool pads.
Also as many say, Pledge does soften old vinyl from its brittle state.
I have tin of Brasso and T-Cut which both are hard work. Did try a plastic scouring pad the type with sponge on the back, bad results marking the vinyl.
So as seen on the Tube, some use a 75mm polishing pad in a drill on their soft jeeps etc., as anything faster than drill speed (ie: disc grinder) could burn the vinyl.
Which do you think would be more suitable Rayon or Wool pads.
Also as many say, Pledge does soften old vinyl from its brittle state.