Call yourself an engineer?

avocet has it just right...also made me laugh. well said.
how long before were all in lumy green coats, on top of our lifejackets i hasten to add.
not so many yrs gone by you were allowed to be called a "engineer" if you had a degree in..............yes...engineering....
now ..........................................................well, its another story. were all "senior" engineers and " can i see the "senior" bin man please...
seriously, part of the problem is that times are a changin. a little like industrial past did 200 yrs ago.
how many of us can now go under the car bonnet and undestand it. ? phew !!!
we must go forward. but to do that you have to look back. (w.churchill) not me.
were surrounded by water, yes, i know, obvious hey...umm. but where is that great spirit we had, invention, independence, plucky blokes who could turn their hand to anything.
plenty still out there but i am afraid were a dying breed.
on a more cheerful note.....happy easter to you all.
james.
 
An Engineer will design; a Mechanic will fix. Totally separate skills set requirements, both are needed for their different abilities.

An Engineering University Degree is mathematically based to provide the essential ingredient for design.

The Mechanic is trained to understand how something works in order to repair it when it goes wrong.
 
BUKH anode holder - I have a special 22mm spanner cut short because there isn't much room in that area :D

Also the securing nut for my vhf aerial.


100% Correct parsifal - anode nut on my 1979 bukhDV20ME - had to borrow the 22mm! how old is your bukh - & what condition - could use some advice re: cooling circuit (not meaning to change the subject).
 
100% Correct parsifal - anode nut on my 1979 bukhDV20ME - had to borrow the 22mm! how old is your bukh - & what condition - could use some advice re: cooling circuit (not meaning to change the subject).

I'd be happy to tell you what I know (won't take long :D )

And you can borrow the spanner, if you are near Gosport.
 
Top