Boat cover fixings

[Seastoke]

Had 10 of these straps made and sewn on , I provided the plastic bits and all for £40 , not a bad deal and done in 2 days . Thanks for all your help guys .

 

[Seastoke]

View attachment 164961I can't find these type buckle and strap with the triangle sewn in , any help would be great

Hi guys so I have had all the repairs done , but the triangle keep popping off the round studs it slips over if there is much wind . So is there a better idea than the suds for it allow for the covers to flex in the wind without slipping off. Cheers SS

 

[doug748]

These work ok provided they are in an area with no snag hazards:

Seasure Stainless Steel Lacing Hook Small

You can probably hook on direct but I usually use a rubber band doubled through the plastic hook, You can make them from sections of old motorbike inner tube; it adds a bit of stretch to the system.

.

 

[Seastoke]

View attachment 165442
Had 10 of these straps made and sewn on , I provided the plastic bits and all for £40 , not a bad deal and done in 2 days . Thanks for all your help guys .

Hi guys I need your input again , where can I find the white plastic studs what the triangle bits hook on , they are round and take a self tapper through the centre.

 

[Rappey]

Kayo spruce in segensworth sell all the above parts and lots more.

 

[Martin_J]

Or here at Point North..
SMALL LACING BUTTON - WHITE PLASTIC

 

[Seastoke]

That’s great , could not think what they were called .