[2068]
...
Friend bought a wrecked Sealine 305 Statesman as a project (bought blind). Been at it pretty much 10 hours per day for the past 2 weeks.
Engines OK, everything else needs doing!
So far:
Completely de-grease / clean / dry bilges
Outdrive Trim Pumps - Got them Working
Trim Tabs - Got them working
Port Trim up - Replaced signal (trim button) cable
Re-wired from batteries - isolator - bus-bars
New bilge pumps with all new wiring
Trace various wiring issues
Removed seacocks
Removed rotten engine bay covers
Removed all old nav gear
Removed all sh1te / redundant wiring
Cut out section on top of diesel tanks to clean out the gunk (took about 2kg of sludge / diesel bug out of each tank)
Still to do:
Stop leaks from the flybridge
Remove calorifier (may have to cut some seating out)
Sort out out-drives (Hopefully just prop shaft seals / water pickup connection / few other nigglies)
Compound / Polish
I'm most likely missing loads of stuff, that's all I can think of off hand.
Photos ???

