Beneteau First 325

[Caer Urfa]

Hi All
Anyone know the cost of replacing all the standing rigging on a Beneteau 325 including the bottle screws

Thank you

 

[Bajansailor]

According to Sailboat Data she has a masthead rig (as shown in the drawing below) -
SailboatData.com - FIRST 325 (BENETEAU) Sailboat

I think that @Concerto has probably replaced the standing rigging on his Fulmar relatively recently as part of his massive re-fit - ok, she is fractionally rigged rather than masthead like the Beneteau, but if he has an approx estimate, it should still give you a useful ball park figure (?)

 

[fredrussell]

£2.5 - 3k

 

[dankilb]

We’re currently re-doing our 42’ double-spreader masthead (10mm stays and 8mm shrouds) and are doing rather well at £2.5k for the wires/swaging/screws (but this was paid at Dec ‘21 prices). I’ve probably spent close to another £1k on fittings associated with the mast and boat (the above deal was only for the rigging alone). We were then hit with £1200 for new chainplates.

For a boat our size, though, many would probably say we’re not doing too badly at complete ‘new’ rig for around £5k inc. yard fees.

 

[Streaker1421]

Just had my 31' Jeanneau done for £4k, but that also included a new furlex at £1.5k

 

[Skylark]

I had the rigging of my 361 replaced 8 years ago and it cost around £2500. I sold the boat a few months later ?

 

[TeamSpirit]

about £3.5k+ 20/21 prices

 

[Caer Urfa]

Cheers gents it give me a guide