Heckler
Well-Known Member
For info, the prop on my Bene 381 with an MD22 engine is a left hand 16" by 16" on a 30mm shaft
Stu
Stu
Beneteau 381 prop size
- Thread starter Heckler
- Start date
coopec
N/A
Is that 2 or 3 bladed? Also what is the the gear box ratio ?
Skylark
Well-Known Member
Hi Stu,
When are you going back in?
Returning to the same marina this season?
Do you plan to be around at Easter?
When are you going back in?
Returning to the same marina this season?
Do you plan to be around at Easter?
Heckler
Well-Known Member
3 bladed, someone has replaced the std Beneteau one, the box is the std MS2, don't know the ratio. The prop is bronze, the surveyor pointed it out, it gave a dull ring instead of a ting when tapped. Also there is no anode on the end of the prop as on the std one. She revs to 2700 with the stern dug well in at about 7 - 8 kts.
Stu
Heckler
Well-Known Member
David
she is waiting for a break in the weather and then HH. Was planning on this weekend but the weather is a bit iffy. We are going to the boat this weekend, sails on and then wait for a break in the weather. So, see you soon!
Stu
she is waiting for a break in the weather and then HH. Was planning on this weekend but the weather is a bit iffy. We are going to the boat this weekend, sails on and then wait for a break in the weather. So, see you soon!
Stu
coopec
N/A
Stu
I just did a search. Apparently a MS2 gearbox is 2.4:1
I just did a search. Apparently a MS2 gearbox is 2.4:1