Anyone know of "Keypart"

[Dave_Snelson]

Anyone know of \"Keypart\"

I have been searching for a company called "keypart" who are suppliers of marine engine spares. I have searched the internet which just bombards me with loads of similar names.

I believe keypart do reasonably priced Volvo and Mercruiser spares, which is why I want to find them - £40 for one oil filter really p1sses me off!!

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[Will_M]

Re: Anyone know of \"Keypart\"

Keypart, dont ya just love em....


Tel: 01923 221 490

http://www.keypart.co.uk/

<hr width=100% size=1>

 

[gonfishing]

Re: Anyone know of \"Keypart\"

Dave
they are o.k for a few things, but be carefull and make sure you check the prices aaginst motor factors!! I didn't listen to Barryh and it cost me £40.00 for a pump diaphram when i could have bought the whole pump for £8.00

julian

<hr width=100% size=1>If it can, It will. 21 and counting??

 

[Dave_Snelson]

Thanks Chaps - nm

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[BarryH]

Re: Thanks Chaps - nm

What is it your after?

<hr width=100% size=1>

 

[Dave_Snelson]

Re: Thanks Chaps - nm

Nothing in particular at this stage Barry. A chap I know mentioned them some time back. He also mentioned that if I get the serial numbers of the engines and drives, that they would keep them on file for any future purchases, also they could give an outline of what lines they do for those engines and drives.

<hr width=100% size=1>Madoc Yacht Club
<A target="_blank" HREF=http://www.madocyachtclub.co.uk>http://www.madocyachtclub.co.uk</A>

 

[BarryH]

Re: Thanks Chaps - nm

Ah yeah, they bung you on their mailing list. Then they do a mail shot that is of interest to you and your engine/drive. Good idea as it saves wading thru all the crap.

I needed some new reverse pawl latches. Couldn't believe the price each. So I just buzzed them with the welder and filed back to appropriate profile. Saved meself a load of dosh.

<hr width=100% size=1>

 

[oldgit]

Re: Thanks Chaps - nm

not always the cheapest but sometimes close.<A target="_blank" HREF=http://www.keypart.co.uk>http://www.keypart.co.uk</A>
but for really cheap anodes/leg gaiters and bits try Screwfix.

<hr width=100% size=1>If it aint broke fix it till it is.

 

[BarryH]

Re: Thanks Chaps - nm

The web site is a bit crappy though. You can't get prices directly from it and they assume that your going to purchase it. The time it takes you might as well phone'em with what you want.


<hr width=100% size=1>

 

[oldgit]

Re: Thanks Chaps - nm

gave up on asking for info my email yonks ago.always phone now.
Very helpful tho.spend ages with me when i need some super rare bolts for my
280T.In the end they ordered from sweden and still got a bit off the price.
Have the bolt I did not use locked up in local bank vault with 24 armed guards because of cost./forums/images/icons/laugh.gif

<hr width=100% size=1>If it aint broke fix it till it is.

 

[BarryH]

Re: Thanks Chaps - nm

Super Rare bolts! Never go to VP for any bolts. I always go to Jones Industrial fasteners. They do super rare bolts. If they haven't got it in stock then they'll make it. Bet they charged you in the region of 14/15 quid from sweden.

<hr width=100% size=1>

 

[oldgit]

Re: Please please

Mention it not.The memory haunts me still ....../forums/images/icons/laugh.gif

<hr width=100% size=1>If it aint broke fix it till it is.

 

[PhilF]

Re: Thanks Chaps - nm

is that www.screwfix.com, cant find any anodes, Ta
Phil

<hr width=100% size=1>

 

[oldgit]

Re: Thanks Chaps - nm

Blinking heck.now i have lost the site as well.

<hr width=100% size=1>If it aint broke fix it till it is.

 

[Forbsie]

Re: Thanks Chaps - nm

Are you sure you didn't mean <A target="_blank" HREF=http://www.arweb.co.uk/argallery/forbsie?&page=1>My Project

 

[oldgit]

Re: Thanks Chaps - nm

Umm yes.Thanks for correction.Wife thinks I have lost it as well/forums/images/icons/laugh.gif
<A target="_blank" HREF=http://www.sea-screw.co.uk>http://www.sea-screw.co.uk</A>

<hr width=100% size=1>If it aint broke fix it till it is.<P ID="edit"><FONT SIZE=-1>Edited by oldgit on 16/11/2003 20:09 (server time).</FONT></P>