AIS on Navionics Question

Irish Rover

Well-known member
Joined
5 Feb 2017
Messages
6,518
Location
Türkiye
Visit site
I have a Raymarine network on my boat with Axiom 9 and Axiom 7 MFDs. I have an Onwa AIS transeiver connected to the network via a 0183 to STNG converter. AIS data is displaying on the MFDs. I have a tablet with Navionics subscription paired to the A9 and A7. I can transfer routes etc from the Tablet navionics to the MFDs. I have the navionics app set to "Display AIS Targets" but I'm not seeing any targets on the tablet. Any ideas?
 

Refueler

Well-known member
Joined
13 Sep 2008
Messages
20,054
Location
Far away from hooray henrys
Visit site
I can only get AIS on my tablet / PC by either cable or WiFi ... that means having a WiFi sender which takes the GPS / AIS data from the Onwa and broadcasts it. ... I use the NMEA2WiFi unit. My Garmin MFD receives via 0183 cable.
I cannot get the MFD to transfer the AIS data it receives to another unit.

Basically all data is input to the NMEA2WiFi unit and that compiles a composite data stream on USB cable, WiFi, 0183 cable ... the receiving units then use what sentences needed ...
 
Top