1inch Npt thread to bsp connector

[Siftasam]

Good morning.
Can anyone advise where to obtain 1inch npt male to 1inch bsp convertor. ?
Have refitted the engne intake with a bronze Perko skinfitting.
However being USA profuct the take off is NPT 1inch female which I need to convert to BSP to connect to our existiing Perkins set up.
Have searched i/net but only found brass so not much good for our salt water sailing. Perko do supply a bronze hosetail so if worst comes to worst will have to put in plastic.
Much appreciate any help.

 

[Poignard]

All I can suggest is A.S.A.P. Ltd.

 

[PCUK]

. . . or your local hydraulics supplier.

 

[PabloPicasso]

Or buy one of each and get a specialist to weld them together.

 

[Siftasam]

All I can suggest

All I can suggest is A.S.A.P. Ltd.

Thanks Poignard but asap do not have one. Surprising as they supplied the valve.

. . . or your local hydraulics supplier.

A bit worried about the metal of hydraulic fittings…?

Or buy one of each and get a specialist to weld them together.

That sounds a good option We have. Inquired about having a fitting made but hugely expensive!!”

 

[PCUK]

Stainless steel no good?

 

[Siftasam]

Thanks PCUK- did exactly as you suggested -Mr Stainless sourced on from one of his suppliers. Has worked fine- fingers crossed no problems down the line..