Recent content by youen

  1. Y

    Sailing boat to rent in Cornwall

    Sea shanty seems to be closed this year
  2. Y

    Sailing boat to rent in Cornwall

    at the moment my only offer is a Bavaria 36 from Liberty Yachts that I am going to accept
  3. Y

    Sailing boat to rent in Cornwall

    I am already in touche with them and wait for a reply.Thanks
  4. Y

    Sailing boat to rent in Cornwall

    I am looking for a sailing boat (near 30 feet long )to rent on between Plymouth and Falmouth in June.its seems not very easy to find,have you any recommandations
  5. Y

    A fall in boat prices on horizon?

    Please can you tell me the meaning of M A B?a big problem for us EU buyers is to pay the vat on the purchased boat
  6. Y

    French Sextants

    Poulain is a sextant maker for the French Navy
  7. Y

    Yamar 1gm10 head gasket

    There is oil under the engine,at first i found à leak at the end of an oil pipe on the banjo screw situated on the top of the rear part of the engine near the air filter, i changed the copper joints and the leak was fixed.But later i found again oil under the engine and so asked an engineer to...
  8. Y

    ? the most uninviting toilet block in a marina, nominate yours

    Camaret next to the harbour under the castle still very dirty in 2022 !!! Its a shame for the town and France,
  9. Y

    Yamar 1gm10 head gasket

    How do you diagnose a blown head gasket on a Yanmar 1gm10, there is no white smoke, the engine starts at the first attempt, there is only a small leak of oil.Many thanks
  10. Y

    First 25.7 yacht legs

    My 25.7 has yacht legs in 2 parts that I have never fitted.How can I tune their length?Is there on this forum and owner with the same type of boat and the Beneteau original yacht legs who can help me.Thanks
  11. Y

    Mousing a new halyard

    Thanks everybody, at the end I have suceeded after taking apart the sheave box and used an electrician needle push through the mast from the lower end to the mast head
  12. Y

    Mousing a new halyard

    I try without success to mouse a line for a new jib halyard on the ZSpar mast of my First 25.7. At the moment the mast is laid down in a shed.When I use an électrician needle from the mast head each time I try the guide is stopped at the level of the spreaders ,when I try from the other...
  13. Y

    Backstay flicker

    How long must be a batten for a backstay flicker for a First 25.7?thanks
  14. Y

    Nautos products

    Nobody knows?
Top