I had a similar problem and managed to modify a similar plug to suit. write up here :-
Raymarine NMEA obsolete connector replacement - Jeanneau Owners Network
I had a similar problem last year with my paddlewheel not reading correctly it was about 10 years old and other than needing cleaning every now and then ad never had any issues. Like yours it rotated freely when removed and registered on the instrument when spun. I could see no problem at all...
The water seal can be replaced from the front without removing the pump. I used a double lipped replacement seal. The old one can be prised out from behind the impeller. Make sure you get a new seal with a stainless steel spring.
When this fault occurred on my hob (Eno) I screwed up a small piece of tin foil and dropped it into the knob before replacing it. This packing gave enough extra clearance for the valve to fully engage and since then the valve has worked perfectly.
My Samsung A20E is dual sim as is all the A series, both sims 4G and both on receive all the time. You select which one transmits for both phone and data.
If you set the sim (in a phone prior to inserting it into the automation device) to always forward voice calls to a different number, when you then rang the number from a phone the network by forwarding the call, would generate a chargeable transaction. Text messages would still be received by...