Ian_Edwards's latest activity

Stainless steel is no more difficult to cut than mild steel. The work hardening that takes place when drilling this metal with a blunt...

Hi I intend add 30m of nylon rode to my existing 10mm chain. I'm thinking of 3 strand nylon, but what size and the most appropriate...

What I decided to do: I did quite a lot of Google searching and found some interesting review sites, presenting test data for a range of...

I got condensation on the outside of my old Waeco fridge freezer, when working at -18C. I don't think that insulation on any of these...

Thanks for the very useful replies. I'll do some more research on the low cost items, and see if I can find a "good deal".

My trusty WACO CX40 compressor fridge freezer has failed after well over 20 years of being move around, home-car-boat-car-home, bounced...

Read the first two.lines of his post - he says using UKHO 2km model

From my limited perspective, I use the UK met office model on predict wind. It has a 2km grid, and in costal water around NW Scotland...

I'm disassembling internal furniture to access the stuff I really want to replace in this case a matrix heater. The heater was installed...

Hi I'm looking for a mulitool saw blade which will cut through No 12, 316 SS self tapping screws. All the metal cutting blades I've...