Greg2's latest activity

Thanks for the offer of help, having looked at your old boat I may be contacting you about the dashboard modifications and cockpit...

The S34? My guess was that was the model you were looking at. Our last boat was an S34 - absolutely great boats and the KAD32s being 4...

VP (Paul) has been very generous with his advice over many years, a clever engineer that has certainly seen all aspects of marine diesel...

When you see oil emulsified it’s had water enter by some means , a simple pressure test won’t make it go away, I would have changed all...

…continued Below is the pilothouse, pretty much finished. There was discussion above in the thread worrying that the 5 Garmin 9022...

Busy here and have not found time for updates, sorry. Boat is in water, has finished sea trials and is in final de-bugging. Delivery to...

…Continued Owner cabin on main deck. The 4th pic is the dressing area, forward of the headboard, and at the far end (ie starboard...

Thanks all for all the thoughts. Have made an offer, I will see where we get to

Very wise, particularly as you are a first time buyer. We did the same when we bought our current boat and it is our sixth boat in 22+...

Percentages are a little misleading and perhaps irrelevant when debating this topic but for what it is worth I have gone to 30% below...

Just an update on this old post….. The leg was removed and pressure vacuum tested with no fault found (by a trusted marine engineer)...

We use either a round turn and two half hitches or a clove hitch with a half hitch or two to make sure they don’t loosen. We rarely...

I am probably somewhere in the middle with a few strategically placed fenders being sufficient to do the job. To be fair, I will have...

We carry 6 decent sized cylindrical fenders and two ball fenders for our 36 foot mobo and we have found that they cater for any...

I'm in the process of registering my new to meet boat on UKSR Part 1. I received an email on Friday asking for some additional...