andsarkit's latest activity

It looks like a simple 100w panel could be used directly as long as the open circuit voltage is not above 28V. The 12V charger...

Navman disappeared from the marine market a long time ago. I think they were also branded as Northshore but the company was bought out...

I have received this from an ex-colleaugue (last seen 30 years ago!) I thought I’d give you some information on this as you state on...

Check with your cable spec but I think the problem is more likely to be volt drop rather than current capacity. If you work out the volt...

Assuming you have the makers plate try here: Yamaha years The letters repeat so you need to know the approximate date.

Yes to the water taxi. Give Dart harbour a call as they are very helpful. harbour guide Car parking is the big problem in Dartmouth. I'm...

It seems a shame to scrap it if the plotter just requires a good GPS input. The date/time comes from the NMEA 0183 sentence from the...

Some years ago I flew out to Israel to work on a ship and had my passport stamped on the way in. During the night the ship moved along...

The earlier engines had a smaller alternator pulley which rotated the alternator faster but put a significant load on the engine when...

You could probably attack the sides of the cone with a triangular file to add some grooves or even make it more a pyramid square shape...

I have used seismic strings (2.4km long) that had a kevlar (?) strain member core. The 4 sections were joined with a metal fitting with...

Tighten the nut on the pivot bolt until it will just stay in the fully raised position

I have used variations of these which I bought in the past from Farnell but these should be OK https://www.ebay.co.uk/itm/162030358261

The later ones have a pin in the clamp that pushes in to lock in the up position. Perhaps the earlier ones were not fitted with the pin.

I have also got some folding panels to go on the sprayhood this season. I was planning to make a pad from a sheet of polyethylene closed...