Wind farms
Amazing RYA suddenly intrested when the South coast is affected. Not a sodding word when North Sea proposals where fielded. Lets see what happens when some floating Gin palace has to go out of there way when doing a marina hop.
How I was Cured
Many years ago before Health & Safety went mad I was given the chance to have a pleasure tip as it was called then on a Trawler . I was fine until we left the Humber, no sooner had we cleared Spurn I Started a close relationship with the starboard rail. After 12 hours I was...
think about it gents
If the chainplates could take the wieght of the boat why dont we just put a lifting eye on the mast top, The breaking strain of the rigging does not match the wieght of the boat so the chainplates are not designed to take the lifting load. It would probably result in 4...
Cockpit security
There are several items available to cover external areas, but the most controlable are infrared beam systems which are desined for external use. Also the washboards could be fitted with shock sensors whitch attach to the frame so do not restrict access. The systems can also be...
GPS Antenna took a bit of a knock unstepping mast, well the peices are scatered over most of the yard. Do any of you chaps know who or where one might get a replacment Antenna for my Raystar 590. Suppose doing it on the way out is better than on the way in.
hope you can help.
Allan..
Antenna to my Raystar 590 took a bit of a knock yesterday whilst unstepping mast. Well it was totaly destroyed. Do any of you gents have one kicking round the shed or garage for sale. Should upgrade but find unit great.
ask your supplier if he would be able to check the electrolite level and S/gravity. If he is willing to accept there return he sounds like a customer orientated Guy. They may have been tipped or miss handled in transit to him. They will have the tools to check both.
ACT Ah Tester
I have used the ACT meters for the last 15 years as an Engineer. The meters are as accurate provided hey are used correctly .
It seems from your description you are using the meter correctly and would trust the readings given.
You should also check the S/Gravity of the...
I did same thing two years ago with polished Ali bonded to bulkhead and cooker surroud useing contact cement. still stuck and takes a regular polishing from wife without fault.