Daverw

It would need to be degassed before brazing, then evacuated and recharged, not easy to do without the tools, if you try and do this...

The other possibility, not part of this thread exactly, are wireless switches. The way to accomplish this are endless, but for a...

I used R&D mounts on my 3YM 30. They fitted straight in and have been great.

Ours is exactly the same Z Spars France, never gave us any concern, again a pin with washers either side with split pins to hold. It’s a...

How do people actually get taxpayers money for a wheeze like this "survey"?

Don't know about your area, but all the tyre places and service garages I've used in the last 20+ years use torque wrenches on wheel...

Like a marine version of snap on?

I have a little bahco1/4” set that covers to 13mm and a 3/8” set that covers to 22mm, over the last two years the 1/4” has done most...

You are adding losses from the solar by going through the starter / dc to dc. We have just converted to lithium and have starter...

Looks like a J-pole antenna, the shorter section is the tuning circuit, so it doesn't need a tuning coil. Interesting design. Monopole...

I did see one sone time ago that had a narrow long circuit board inside that was the antenna, this was a 2m radio ham one so they do...

I trained as an woodwind instrument repairman and often had the issue with stuck small brass machine screws, one solution was to file...

I’ve used a small patch of silicone sealant on the tip of glove finger, worked well and cheap

I use NavigationPLANNER 7 - Course planning software - NavigationPLANNER on my PC. It’s a bit slow and clunky, doesn’t do auto routing...

No doubt some woke entity complained about naming ?? I have actually picked up the tab for a couple of boats that forgot to pay here...