farmer.leo
Well-Known Member
Does anyone know the part number for the zinc collar which goes just behind the propeller of the Yanmar SD20 sail drives?
Zinc anodes for Yanmar SD20 saildrives
- Thread starter farmer.leo
- Start date
Skylark
Well-Known Member
If it's the same as the SD50:-
McDuff is CM 1964 200 2652Z
Plastimo is PL 38334
These are both one piece versions and hence the prop must be removed to change them.
If you have a Stripper, there is a "special" anode. It is same as the above but with an additional drilled hole (0.5 inch clearance drilled through the 25mm radius lug). The Stripper version can not use the newer, 2-piece anode, which can, I believe, be replaced without having to remove the prop. I don't know the p/ns for the 2-piece version.
Hope this helps
McDuff is CM 1964 200 2652Z
Plastimo is PL 38334
These are both one piece versions and hence the prop must be removed to change them.
If you have a Stripper, there is a "special" anode. It is same as the above but with an additional drilled hole (0.5 inch clearance drilled through the 25mm radius lug). The Stripper version can not use the newer, 2-piece anode, which can, I believe, be replaced without having to remove the prop. I don't know the p/ns for the 2-piece version.
Hope this helps
farmer.leo
Well-Known Member
Thanks David.
What do you mean by a stripper version?
What do you mean by a stripper version?
Skylark
Well-Known Member
That you have invested :encouragement: yet another £600+ in a rope cutter. I believe that the Ambassador Marine "Stripper" is the rope cutter of choice for sail drives.
savageseadog
Well-Known Member
Yanmar now sell an aluminium version of the anode for marine use. Speak to Marine Power Burseldon
