Yanmar 3GM30F repair manual

[jimi]

Anybody know where I can purchase one, the only place I've found so far is a US site.

<hr width=100% size=1>.. when's that again, but ..

 

[alan]

I bought a Volvo workshop manual for myself, and a Yanmar manual for a friend; both from a site in the States. The manuals arrived in about ten days with no problems. The Yanmar manual is particularly good, with excellent illustrations and descriptions and covers 2GM10/2GM20/2GM30 if I remember correctly.

I don't have the address right now (it's on the boat); but if you would like it I will get it later today and put it on the board this evening. It's probably the same as the one that you have anyway !!

Alan.
Nettuno, Italy.

<hr width=100% size=1>Alan Cloke

 

[jfkal]

PM me

<hr width=100% size=1>

 

[farquart]

I did a search on the net amongs uk sites selling marine engine second hand spares etc. Had a few offers for around £40. Unfortunately havent kept the addresses but they were pretty easy to find.


<hr width=100% size=1>

 

[Capt_Scarlet]

I ordered one from Yanmar stand at London Boat Show. Actually came from French Bros at Brightlingsea 01206 302133 - about £30.

<hr width=100% size=1>

 

[paulrossall]

The Yanmar stand is manned mainly by their agents which means you take pot luck on who you end up talking to and of course who sells you anything you require. The standard of technical knowledge can thus also be variable. You need to find who on the stand works for Barrus, the import agents, as they seem very knowledgeable.

<hr width=100% size=1>

 

[alan]

A bit later than promised ............ but I bought a Yanmar manual from:

www.marineengine.com

The manual was actually a "Seloc" manual, and I find it very good. I think it cost around $30 with p&p and was with me (in Italy!!!!!) in about ten days.

Alan.

<hr width=100% size=1>Alan Cloke

 

[johnt]

you can get one from your local Yanmar agent . it covers 1gm, 2 gm and 3 Gm DONT LET THEM CHARGE YOU VAT on it its a book not spares, and as such is zero rated, should be about £30 if all else fails contact John Cutler at Emsworth marine Power Marine at Bursledon will probably try to charge you VAT (they tried to with me, they wanted £37.50)

<hr width=100% size=1>

 

[allene222]

I think I have this manual on my web site (free)
http://l-36.com/manuals.php

 

[robbieg]

Yanmar Manuel

Register with Boatdiesel (fee of circa $25 from memory) and you can download the full workshop manual. Othewise Yanmar dealer but more like £50 from memory for the workshop manual (another £25 for the parts manual which I have found very useful).

 

[Boo2]

I think I have this manual on my web site (free)
http://l-36.com/manuals.php

As a matter of interest, how does one download from your website ? If I right-click on an item inthe list of manuals I get a .php file but if I left-click the page displaying the .pdf doesn't have a download option ? (Browser is Firefox 3.6.12).

Thanks,

Boo2

 

[Spyro]

Full workshop manual here
http://www.devill.net/Documentation/Yanmar/GM-HM_WorkshopManual.pdf

240 pages around 60 Mb download.

 

[ctva]

Full workshop manual here
http://www.devill.net/Documentation/Yanmar/GM-HM_WorkshopManual.pdf

240 pages around 60 Mb download.

I downloaded that one recently. Full manual and free, great!

 

[AdmiralCat]

yanmar manuals

hello

I was wondering if anyone had or knew where I could find the version of this manual that covers saildrive models i.e. the 3GM30FC (the intro to the manuals posted here say they don't cover engines with "C" which indicates its a saildrive model)

many thanks in advance
Alex

 

[Diesel Engine Parts]

Free Yanmar Manuals

Hello,

I am happy for you to download this manual free from my website www.dieselengineparts.com.au the link for the particular manual you need is:
http://www.dieselengineparts.com.au/pdf/3GM30/3GM30_1GM10 2GM20 3GM30_service_manual.pdf
Regards

 

[AdmiralCat]

Hello Diesel Engine Parts, thanks for that, fantastic, I've been looking for ages
Regards
Alex

 

[pieter2]

Take a look at:
http://www.zeilersforum.nl/index.php/Forum/111-handleidingenhoek/178429-motoren
A collection of all kinds of manulas of marine stuff.

It is in Dutch, but they will respond on English messages as well.
Just ask what you need.

 

[jimi]

The original post was over 8 years ago, and I got sorted out over 8 years ago ;-)

Many thanks to all.