richardh10
Well-Known Member
The valve on my xm 260 has a slow leak which is annoying. Any ideas where I can get a replacement, or how I can fix it?
Cheers
Cheers
Xm dingy valve leak
- Thread starter richardh10
- Start date
alteredoutlook
Well-Known Member
Have you identified which part is leaking? (pump it up and spread washing up water and watch where the bubbles come from).
if you are lucky if could just be the join between the valve and the rubber of the boat - in which case just remove the whole valve, clean up the surfaces and re-seal with something like sikaflex.
If you need to purchase a new valve (its quite good to have a spare anyway) have you tried asking at http://www.ribstore.co.uk
if you are lucky if could just be the join between the valve and the rubber of the boat - in which case just remove the whole valve, clean up the surfaces and re-seal with something like sikaflex.
If you need to purchase a new valve (its quite good to have a spare anyway) have you tried asking at http://www.ribstore.co.uk
Last edited:
VicS
Well-Known Member
Polymarine ? https://polymarineshop.com/valves-1.html
Spare parts may be available to overhaul your existing valves
Advice on fitting: http://www.polymarine.com/advice/fitting-valves/
Last edited:
