Ardenfour
Active member
Does anyone have any experience of making aluminium window frames from suitable extrusions? Or a contact for suppliers of the frames themselves?
<hr width=100% size=1>
<hr width=100% size=1>
window frames
- Thread starter Ardenfour
- Start date
VicS
Well-known member
Salford House Services in Sevenoaks will make frames for you or refurbish old windows. They don't have a web site as far as I know but a search on this forum back for a few weeks will find their phone number. They also advertise in pbo
<hr width=100% size=1><font color=purple>Ne te confundant illegitimi.</font color=purple>
<hr width=100% size=1><font color=purple>Ne te confundant illegitimi.</font color=purple>
rex
Member
Re: Salford house services
I tried them. Sent hardboard templates as requested by courier chased for 2 months but never even got a quote from them. I would try elsewhere.
<hr width=100% size=1>
I tried them. Sent hardboard templates as requested by courier chased for 2 months but never even got a quote from them. I would try elsewhere.
<hr width=100% size=1>
jerryat
Active member
Hi Halcyon23,
Try this company:
C and J International Windows
Unit 10
Peacocks Industrial Estate
Providence Street
Cradley Heath
West Midlands B64 5DG
Tel: 01384 411884
Ask for Jan, who is a totally delightful and helpful lady. They recently made new windows for my Fulmar, and the standard of materials and workmanship was outstanding. If she can't sort out your requirements, she will know someone who can.
Very highly recommended company.
Hope this helps
Jerry
<hr width=100% size=1>
Try this company:
C and J International Windows
Unit 10
Peacocks Industrial Estate
Providence Street
Cradley Heath
West Midlands B64 5DG
Tel: 01384 411884
Ask for Jan, who is a totally delightful and helpful lady. They recently made new windows for my Fulmar, and the standard of materials and workmanship was outstanding. If she can't sort out your requirements, she will know someone who can.
Very highly recommended company.
Hope this helps
Jerry
<hr width=100% size=1>
Mudplugger
New member
Just had 11 new windows made for Deck Saloon by Technautic @ Burnham, Super job at a very competetive price, millimetre perfect....To be reccomended! hope this helps. Tony W.
<hr width=100% size=1>Tony W.
<hr width=100% size=1>Tony W.
misterg
Active member
Dear Halcyon23 (!)
I did once try and bend up some window frames for a camper van from aluminium "U" extrusion - absolute nightmare! I think that unless you have a bending roll with the right dies, it's a non-starter. Eventuallly ended up fabricating them from steel sheet.
It's only money.....
Andy
<hr width=100% size=1>
I did once try and bend up some window frames for a camper van from aluminium "U" extrusion - absolute nightmare! I think that unless you have a bending roll with the right dies, it's a non-starter. Eventuallly ended up fabricating them from steel sheet.
It's only money.....
Andy
<hr width=100% size=1>