3 Jun 2013 #1 sunquest Well-Known Member Joined 31 Oct 2005 Messages 871 Location Kent Visit site Can anyone advise how to remove the drive cog mechanism from the davit housing? The metal clip which ratchets on to a cog is broken and need to replace. Thanks in advance.
Can anyone advise how to remove the drive cog mechanism from the davit housing? The metal clip which ratchets on to a cog is broken and need to replace. Thanks in advance.
3 Jun 2013 #2 P PCUK Well-Known Member Joined 29 Jun 2005 Messages 8,526 Location Westleigh, Nr Tiverton, Devon. Visit site If it's the same as mine (can't remember the size) then there are two studs with nuts each end and these hold the winch assembly in the davit body.
If it's the same as mine (can't remember the size) then there are two studs with nuts each end and these hold the winch assembly in the davit body.
