Which Loctite? - Saildrive prop

emsworthy

Well-Known Member
Joined
15 Jul 2009
Messages
875
Location
Emsworth'ish
Visit site
Help!

Boat's due in the water on Friday and I've just remembered I should have put some Loctite on the long retaining bolt in the centre of the shaft holding the cone/prop on my saildrive. :(

The last I remember there was only one sort of Loctite thread sealant, now it seems there are about half a dozen! Can anyone please advise as to which one I need? I have the two piece anode and can therefore replace it without taking the prop off next year, but I guess I may need to be able to get the prop off at some point in the future. If this affects the choice.

All help as always gratefully received.

Tim
 
Help!

Boat's due in the water on Friday and I've just remembered I should have put some Loctite on the long retaining bolt in the centre of the shaft holding the cone/prop on my saildrive. :(

The last I remember there was only one sort of Loctite thread sealant, now it seems there are about half a dozen! Can anyone please advise as to which one I need? I have the two piece anode and can therefore replace it without taking the prop off next year, but I guess I may need to be able to get the prop off at some point in the future. If this affects the choice.

All help as always gratefully received.

Tim

I use thread sealant on my 120 leg, but it's not strictly necessary. Halfords sell a thread locker that's just the job.

PWG
 
You need one that's designed for underwater use, not all are. I still have the Volvo stuff that came with my prop but I am sure it's just rebadged from elsewhere with the usual Volvo mark up! However, I can confirm that it's blue.
 
Top