What type of fuel connections are these?

[hennypenny]

Hi all, does any one know what type of fittings are in the picture and what these need to be replaced with? Are they compression fittings like these:

Hose Connectors 1/4" BSP Female to 5/16" Hose Tail




I am replacing the fuel system with a new Racor and new fuel lines the old ones were crimped. I am not intending on replacing them with crimped again. IF it matters this is on a Bavaria 31 from 2001.
Thanks a lot in advance for any help.

 

[rotrax]

Compression fittings with a hosetail for the flexible hose pipe.

Zinc plated, possibly NPT?

Without seeing/measuring/trying known sized fitting difficult to be sure.

 

[hennypenny]

Also if any one knows what size they need to be on the fuel tank side I would be very grateful. thank you!

 

[hennypenny]

Compression fittings with a hosetail for the flexible hose pipe.

Zinc plated, possibly NPT?

Without seeing/measuring/trying known sized fitting difficult to be sure.

Thanks very much; yes annoyingly I forgot to measure so I don't know what size they are! I am fitting an 8mmm hose pipe but don't know the size of the bit that attaches to the fuel tank

 

[Daverw]

Standard connex compression fittings, often referred to as hydraulic cutting ring, Looks like 8mm or 10mm, fittings cheap from hydraulic hose trade counter so you could probably buy a selection for under £5

 

[shoc]

Hi all, does any one know what type of fittings are in the picture and what these need to be replaced with? Are they compression fittings like these:

Hose Connectors 1/4" BSP Female to 5/16" Hose Tail




I am replacing the fuel system with a new Racor and new fuel lines the old ones were crimped. I am not intending on replacing them with crimped again. IF it matters this is on a Bavaria 31 from 2001.
Thanks a lot in advance for any help.

Hi there,

How did you get on with this project? I'm about to do a similar job - have you any tips?

Thanks