West System Six10 thickened epoxy adhesive

Concerto

Concerto

Well-Known Member
Joined
16 Jul 2014
Messages
6,669
Location
Pwllheli Marina, N Wales
Visit site
Agree its very useful and seams to keep well in the tube providing you clean the top after use. I don't bother with the mixing wand which just has a single use - dispense required amount and mix with a 'coffee stirrer' splint.
 
Yes it's quite useful, I used it once many years ago and it seemed to do a good job. Not cheap but very convenient.

Now if International would do the same thing but for two pack paint, I would be waiting to buy that.
 
Concerto said:
I had not heard of West System Six10 thickened epoxy adhesive before, but having a single cartridge with thickened epoxy and hardener in separate chambers and ready to dispense in the correct proportions seems almost too good to be true. It should be of interest for many small repairs.

West System Six10 back in distribution in EMEA after 'challenging' year - Marine Industry News
Click to expand...

There's a load of products like that used in industrial applications that you can't just buy in 1's and 2's.

I worked in wind turbine blade structures for a while, we used a Sika epoxy in 205ltr drums that also came in twin 330ml cartridges.
 
You must log in or register to reply here.

Share this page

Top