Waterpump rebuild - Coolant - Any engine

[BruceK]

One of the bearings in my waterpump collapsed and after pulling it out to replace quickly realised that to strip the water pump down required not only several specialised tools and equipment but also was a little bit above the reach of DIY. A new pump from Volvo was piracy at around 900 euro and I felt a bit sick about it tbh. Anyway I asked around and after a recommendation sent it to SP Waterpumps in Warrington. 188 quid for a full refurb and it looks like new. BRAND NEW!! They even blasted it down, repainted it Volvo Green and replaced all internal parts and supplied a gasket for refitting. They did this in 3 days which is a quicker turnaround than buying direct.

Bookmark these guys, no affiliation, just super impressed and that's not something I often feel about 3rd Party rebuilds.

SP Water Pumps - engine water pumps for all makes and models

 

[BruceK]

 

[Mr Googler]

They superseded the water pump for kad 42 so you have to buy some conversion bits too if going the new route so that’s a good result ?

 

[Seastoke]

Ok the excuses have started , why he will be going slow , we will watch out for flying pumps.

 

[BruceK]

Another Malbec to the basket please Mister. Have you seen the winds for this weekend? I have to travel 50mph winds against tide in the Dink down the length of the estuary to fit it and some davits this weekend. Real man stuff. You'd burst your poop shute. LBRodders nowhere to be seen despite his epic challenge.

 

[oldgit]

Any proper motor factor servicing road transport and plant can usually provide this service.
Truck drivers also need this job done quickly are very reluctant to pay marine prices.
Locally this outfit will do virtually anything, including even turning up a new prop shaft as well as such things as custom hydraulic hoses,
Auto components from Aghabridge Ltd in Rochester

 

[BruceK]

Any proper motor factor servicing road transport and plant can usually provide this service.
Truck drivers also need this job done quickly are very reluctant to pay marine prices.
Locally this outfit will do virtually anything, including even turning up a new prop shaft as well as such things as custom hydraulic hoses,
Auto components from Aghabridge Ltd in Rochester

No argument but these guys specialise and as a 1 trick pony they have really mastered it. As I said, I'm not easily impressed.