Water in inflatable's tubes

[cpedw]

Water in inflatable\'s tubes

There's a small amount of water inside the tubes of my Wetline inflatable. Like most dinghys, the valves are on the inside of the tubes so whichever way you turn it, the water is not readily going to lie near a valve. I'm looking hopefully for a cunning suggestion to persuade the water near the valves then I'll open the valves and the water will rush out.
Eagerly anticipating your recommendations,

Derek

<hr width=100% size=1>

 

[thomshap]

Re: Water in inflatable\'s tubes

I used my hand pump in suck mode, got nearly all of it out of my Quicksilver, not sure if ot would work with a foot pump.

<hr width=100% size=1>

 

[andy_wilson]

Re: Water in inflatable\'s tubes

Let all the air out on a very hot day and then re-inflate.

Repeat until all the water has evapourated into the air contained in (and let out of) the tubes.

<hr width=100% size=1>

 

[BarryH]

Re: Water in inflatable\'s tubes

"a very hot day "......I see a flaw in your plan already/forums/images/icons/smile.gif

<hr width=100% size=1>