Volvo 2003T fuel injector removal

[Beneteau381]

Make a sliding hammer.
Use a nut the same size as the top of the injector, weld rod to this( friendly welder) with a weight slide onto the rod. Rod must be at least 9'' long with a washer welded on the top, to stop the weight flying off. Screw this to top of injector and slide weight up several times. Works every time.

Nice advice, do that and the copper sleeve will come out as well, then a world of pain happens!

 

[scottie]

Your link is an object lesson on but as we are playing secret squirrel I say any more