VHF Aerial help

K

kirielad

Well-Known Member
Joined
3 Nov 2005
Messages
223
Location
Hants, UK
Visit site
having just taken the mast down on Feeling Good and inspecting same, I discovered that the vhf aerial I installed a mere 18 months ago is literally crumbling into ally oxide dust /forums/images/graemlins/mad.gif

I would appreciate any recommended replacements (preferably with a windicator/ windex 'built in') and supplier details if poss. The current cable setup runs down to a detachable plug / socket at the mast foot.

thanks
Rob
 
After the experiences with mine, I wouldn't buy one of these solderless types.... a proper soldered plug to screw in is far more reliable when installing, IMO.
 
Hi,
I had the same problem with a 'cheap ' antenna bought 3 years ago. I have just bought a very high quality Metz antenna off ebay, brand new for 39.95. A bargain in my humble opinion as it really is a quality bit of kit. I believe the chap was called Salty John, if you look on ebay for him. I know he also does a windex for same antenna also.
Regards,
Matt
 
I've always used Shakespeare. Strong and reliable. Since you have a yacht, a 6dB gain would be the max I would recommend given the heel you experience. Any more dB and you may well decrease the operational range. Finally, have as few joins in the cable as poss.
 
You must log in or register to reply here.

Share this page

Top