VGA, HDMI chart table socket

[dgadee]

There are lots of wall plate type sockets available:



but I was wondering if there were anything smaller available than this single patress box type? I could make one up, of course, but just wondered if anyone knew of suppliers. I swap screens about - 12v tv for when I don't have shore power and a decent monitor when I do have it, so there's a lot of wiring around. Grouping the outputs together should neaten things up.

 

[prv]

I reckon you'd be best served making your own with whatever combination of connectors you need. Buy panel-mount connectors from RS or whoever, then either drill/cut/file a piece of plastic yourself or do the layout on a computer and get it laser-cut. In the latter case you could also have appropriate labels engraved into the plate.

Pete

 

[Rum Run]

See www.lindy.co.uk for architrave mounted connectors. I have just used them on an AV install and can recommend them, at least in the dry.
They come in sections, the actual socket, then an adaptor, then the faceplate. I suspect the adapters could be fitted into a bespoke faceplate.