Iliade
Well-Known Member
Utter madness. What do they propose that we use as an antifouling agent? Sodium chloride? Oxygen? Carbon dioxide? DDT?
EU 45 antifouling contains, would you believe, 45% copper oxide, which they claim is the highest available.
Ah. Anyone know off the top of their heads how much copper as a percentage is in (say) Cruiser UNO or Tiger?
Donald
Looking at the (Irish) Biocidal Products Register , most popular brands of antifoul have about 30-40% Di-Copper Oxide as the main active ingredient often with something like Zinc Pyrithione as a further additive. I can't recall how to work out the relative mass of Copper with 30-40% Cu2O, but I'm pretty sure it will be outwith the US limits!
There were a few varieties with 25-30% Cu2O range , and a few with 40-50% Cu2O range, but most are in between these extremes.
Would the ban apply to Coppercoat as well? It's not eroding or soluble so isn't a hazard?
I've always thought it was zero? Don't they contain Copper Oxide, as opposed to copper which subsequently oxidises? Coppercoat is copper but that's not a paint.
Would the ban apply to Coppercoat as well? It's not eroding or soluble so isn't a hazard?
Ummm ... this is what the legislation actually says:
RCW 70.300.020
Antifouling paint containing copper.
(1) Beginning January 1, 2018, no manufacturer, wholesaler, retailer, or distributor may sell or offer for sale in this state any new recreational water vessel manufactured on or after January 1, 2018, with antifouling paint containing copper.
(2) Beginning January 1, 2020, no antifouling paint that is intended for use on a recreational water vessel and that contains more than 0.5 percent copper may be offered for sale in this state.
(3) Beginning January 1, 2020, no antifouling paint containing more than 0.5 percent copper may be applied to a recreational water vessel in this state.
Pardon if I am stating the obvious but the legislation is the product of the liberal whacko's in Washington State which is distinct and not to be confused with Washington D.C., as such it has no bearing beyond the borders of the State of Washington. The remaining 49 states still recognize common sense....
Which stated copper rather than copper dioxide.
Which I discovered a couple of years ago was actually rubbish antifouling on our boat on the River Deben. I've never had so much fouling when laid up in the autumn. I'll never use it again.
(tried to add a picture but couldn't find it!)
Would the ban apply to Coppercoat as well? It's not eroding or soluble so isn't a hazard?
As Bozlite has pointed out the legislation specifically mentions paint. Coppercoat is part of the gelcoat and no more eroding than the copper containing propeller or through hull fittings, thus coppercoat is ok.
As Bozlite has pointed out the legislation specifically mentions paint. Coppercoat is part of the gelcoat and no more eroding than the copper containing propeller or through hull fittings, thus coppercoat is ok.
Coppercoat is a paint when applied, a copper loaded epoxy paint, no mere semantics.
Don't get me wrong I think the ruling is a bad one but what are the facts regarding pollution by copper or copper compound anti-foulings?
Ummm ... this is what the legislation actually says:
RCW 70.300.020
Antifouling paint containing copper.
(1) Beginning January 1, 2018, no manufacturer, wholesaler, retailer, or distributor may sell or offer for sale in this state any new recreational water vessel manufactured on or after January 1, 2018, with antifouling paint containing copper.
(2) Beginning January 1, 2020, no antifouling paint that is intended for use on a recreational water vessel and that contains more than 0.5 percent copper may be offered for sale in this state.
(3) Beginning January 1, 2020, no antifouling paint containing more than 0.5 percent copper may be applied to a recreational water vessel in this state.
http://apps.leg.wa.gov/rcw/default.aspx?cite=70.300.020
Is there more to the legislation than this? The way I read that there is nothing to stop cruising yachts that have copper based antifouling from visiting their ports so I'm not quite sure what all the fuss is about.